What is the LED driver power supply, what are the different types, and what classification is it based on? Are there any shortcomings in the overall constant current and the constant current operation? The following small series will take you to understand one by one! The LED drive power source converts the power supply into a specific voltage and current to drive the LED light-emitting voltage converter. Usually, the input of the LED drive power source includes high-voltage power frequency AC (ie, mains), low-voltage DC, high-voltage DC, low-voltage high-frequency. AC (such as the output of an electronic transformer). Let's take a look at the related content with the power management editor. The LED drive power source converts the power supply into a specific voltage and current to drive the LED light-emitting voltage converter. Usually, the input of the LED drive power source includes high-voltage power frequency AC (ie, mains), low-voltage DC, high-voltage DC, low-voltage high-frequency. AC (such as the output of an electronic transformer). The output of the LED driver is mostly a constant current source that changes the voltage as the LED's forward voltage drop changes. The core components of the LED power supply include a switch controller, an inductor, a switching component (MOSfet), a feedback resistor, an input filter component, an output filter component, and the like. According to the requirements of different occasions, there are also input overvoltage protection circuit, input undervoltage protection circuit, LED open circuit protection, overcurrent protection and other circuits. Classified by drive (1) Constant current type The output current of the constant current drive circuit is constant, and the output DC voltage varies within a certain range according to the magnitude of the load resistance. The load resistance is small, the output voltage is low, the load resistance is larger, and the output voltage is also The higher The constant current circuit is not afraid of load short circuit, but it is forbidden to completely open the load; The constant current driving circuit drives the LED, which is ideal, but relatively high in price; Attention should be paid to the maximum withstand current and voltage values ​​used, which limits the number of LEDs used. (2) Voltage regulation When the parameters in the voltage stabilizing circuit are determined, the output voltage is fixed, and the output current changes as the load increases or decreases; The voltage regulator circuit is not afraid of the load open circuit, but it is forbidden to completely short the load; Driving the LED with a voltage-stabilized driving circuit, each string needs to be added with a suitable resistor to make each string of LEDs display brightness average; The brightness is affected by the rectified voltage changes. LED drive power features (1) High reliability Especially like the driving power supply of LED street lamps, it is installed at high altitude, the maintenance is inconvenient, and the maintenance cost is also large. (2) High efficiency LEDs are energy-saving products, and the efficiency of driving power supplies is high. It is very important to dissipate heat from the power supply installed in the fixture. The power supply has high efficiency, its power consumption is small, and the heat generated in the lamp is small, which reduces the temperature rise of the lamp. It is beneficial to delay the light decay of LEDs. (3) High power factor The power factor is the grid's load requirements. Generally, household appliances below 70 watts have no mandatory indicators. Although the power factor of a single power consumer with low power has little effect on the power grid, the amount of lighting used at night is large, and the similar load is too concentrated, which will cause serious pollution to the power grid. For 30 watts to 40 watts of LED driver power, it is said that in the near future, there may be certain indicators for power factors. (4) Driving method There are two types of traffic: one is a constant voltage source for multiple constant current sources, and each constant current source supplies power to each LED separately. In this way, the combination is flexible, and all the LED faults do not affect the work of other LEDs, but the cost will be slightly higher. The other is direct constant current power supply, which is the drive mode adopted by “Zhongke Huibaoâ€. The LEDs run in series or in parallel. Its advantage is that the cost is lower, but the flexibility is poor, and it is necessary to solve a certain LED failure without affecting the operation of other LEDs. These two forms coexist for a while. Multi-channel constant current output power supply mode will be better in terms of cost and performance. Perhaps it is the mainstream direction in the future. (5) Surge protection The ability of LEDs to withstand surges is relatively poor, especially against reverse voltage capability. It is also important to strengthen protection in this area. Some LED lights are installed outdoors, such as LED street lights. Due to the start of the grid load and the induction of lightning strikes, various surges will be invaded from the grid system, and some surges will cause LED damage. (6) Protection function In addition to the conventional protection function, the power supply preferably increases the LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high; it must meet the requirements of safety regulations and electromagnetic compatibility. Compared with the overall constant current, the constant current is more disadvantageous and the cost is higher. But it can really protect the LED and extend the life of the LED, so the constant current is the future trend.
Ungrouped,High Quality Ungrouped,Ungrouped Details, CN Shenzhen Waweis Technology Co., Ltd. , https://www.szwaweischarger.com