Fo system! Are you enough to lie down to watch the World Cup?

The World Cup is open! I don't know how many small partners started chasing the game in the middle of the night. It was hard during the day and I really wanted to lie in bed to watch the game! What? Is the Wi-Fi signal in the bedroom not good? Take out the old route and let it play the heat, give the bedroom a full Wi-Fi.

Is there a cable in the bedroom? Try AP mode

If the cable has been pulled into the bedroom, then using the AP mode is a good choice. To connect the old route, in order to avoid conflict with the existing network or settings, it is best to reset the old route first (usually there is a small hole near the power supply, it will indicate Reset, use something like a toothpick to enter, wait After the indicator light flashes, it can be). Be careful not to connect the network cable at this time, otherwise the network may be paralyzed due to the default IP conflict with the home main router.

After the reset is stable, connect the old router with the default network name, and enter the setting interface with the default mode and password, select the AP mode, set the network name and password.

After clicking Continue or Next button, the cable network will be searched automatically. The search process usually takes about 30 seconds. At this time, connect the network cable connected to the main router to the WAN of the old router (external network cable interface). After the cable network search is completed and automatically connected, the bedroom has a dedicated watch Wi-Fi.

Instantly amplify the signal! Wireless relay

If there is no network cable in the bedroom, choose wireless relay mode. In this mode, you need to put the old router in the bedroom door position where the signal of the main router is better. You must first prepare the power interface. After that, the old router is also reset, enter the setting interface, and select the wireless relay mode.

Some routers need to manually set the IP address. The small series is recommended to be set to 192.168.1.20~30, which is separate from other connected devices that are in use at home, especially the main router, to avoid conflicts.

After that, you only need to select the network. If there are multiple Wi-Fi signals in the home, the first choice is the strongest signal, followed by the 5G frequency band. Select and click Next or confirm. After a while, the old router will amplify the selected Wi-Fi band signal and let the bedroom receive the full signal.

These two Wi-Fi signal amplification modes have their own advantages and disadvantages. The AP mode signal connected to the main router through the wired network is more stable and high-speed, but needs to switch different Wi-Fi; the speed of the wireless relay mode will be affected by the main router Wi- The impact of Fi, but because of the network name, no need to switch, more convenient. The friends can choose according to the actual situation of the bedroom, lying in bed with a full Wi-Fi signal to watch the World Cup, it is simply not cool! !