Simple realization of synchronous monitoring of conveyor belt production line by importing Absocoder. Hot Melt Type Fiber Optic Fast Connector Hot Melt Type Fiber Optic Fast Connector,Afl Fast Connect Lc,Fast Connector Fiber Ningbo Fengwei Communication Technology Co., Ltd , https://www.fengweicommunication.com
Read in absolute position data to realize simple production line monitoring. High-resolution absolute position data can be read into the programmable controller CPU at high speed.
You can simply monitor the production line's operating conditions such as line speed and synchronization errors between production lines.
Even if the production line is still running when the power is cut off, the position data will not be lost when it is restored. No need to perform cumbersome origin restoration operations to restart operation.
Absocoder is an absolute method. Even if the power is cut off and occasional interference occurs, the position can be detected correctly, and the reliability of the production line can be improved. In addition, there is no need to perform a return to origin operation, so the time to start the production line can be shortened.
In addition, Absocoder has achieved battery-free, and maintainability has also been improved. 
Use the conversion unit corresponding to the Q series to easily realize the positioning system. Install the converter (VS-Q62, VSQ262) on the Q series and use it by simply connecting the sensor cable.
No need to create a program, just read in the data, you can easily complete the startup adjustment.
The VS-Q62 and VSQ262 produced by NSD are PLC unit type converters used in combination with the Absocoder detector with high reliability and high durability.
They all correspond to the MELSEC-Q series programmable controller produced by our company, so they can be directly installed on the base unit of the Q series programmable controller, and the detection value of the Absocoder is stored in the data transmission and reception buffer of the programmable controller CPU. In the memory, the position data can be simply read in.
In addition, after using the dedicated software (VS-Q62/Q262-EDW), the number of settings can also be displayed and edited through the computer, which greatly reduces the setting of the parameters bound in the ladder diagram. 
Quick recovery can be achieved by confirming the alarm content and backup unit parameters. The alarm content of the converter can be confirmed through the programmable controller CPU, and the fault location can be quickly found.
In addition, you can back up the parameters of the converter for quick recovery in the event of a failure.
System configuration example 