What is the reason why Konka Internet TV wireless network card cannot be connected? How to solve it?

Many users will encounter the situation that the wireless network card cannot be connected when using Konka network TV. The author analyzes or because of 9 reasons. What exactly is the 9-point reason and how should we solve it? The author then analyzes for you one by one.

1, IP address settings problem.

If the IP address setting problem causes Konka TV to fail to use wireless Internet access, we need to set it up again.

2, the password setting is too complicated.

The password is too complex and errors may occur during the input process. WEP encryption or no password is recommended

3, great geographical environment interference.

If there is a strong source of interference in the home, then the wireless connection will also have a bad network condition. It is recommended to use a wired connection.

4, the signal strength is too low.

If the signal strength is too low, we should appropriately increase the extension cord or use a wired connection

5, the wireless router to the TV through the wall too much.

Similar to Problem 4 and somewhat different, it is recommended to use router bridging or use a wired connection.

6, wireless network adapter and television do not match.

A generation of Internet TV uses Netcore NW330, and the second generation uses Netcore NW360. Identify the model and select a different wireless network card.

7, USB port problem.

Change port to USB1 port test.

8, the wireless network card itself.

Replace the wireless network card test.

9, TV problems.

Contact Konka TV after sale