Yr3 (IP55) Series Slip Ring Rolling Mill Motor

Model NO.: yr3
Starting Mode: Direct on-line Starting
Certification: CE, ISO, CCC
Brand: Pinnxun
Type: Slip Ring Low Voltage Motor
Protect Feature: Enclosed
Structure: Asynchronous Motor
Phase: Three Phase
Color: Grey or Other
Shape: Linear
Scope of The Center Height: H280~H355
Work Mode: S1
Protection Class: IP23
Insulation Class: F
Trademark: pinnxun
Specification: YR
Origin: China
HS Code: 8501530090
Model NO.: yr3
Starting Mode: Direct on-line Starting
Certification: CE, ISO, CCC
Brand: Pinnxun
Type: Slip Ring Low Voltage Motor
Protect Feature: Enclosed
Structure: Asynchronous Motor
Phase: Three Phase
Color: Grey or Other
Shape: Linear
Scope of The Center Height: H280~H355
Work Mode: S1
Protection Class: IP23
Insulation Class: F
Trademark: pinnxun
Specification: YR
Origin: China
HS Code: 8501530090
Product: YR3 winding three phase induction motor


Feature and usage:
YR3 series motor from 4kw-500kw, 2, 4, 6, 8p, IP44, 54 class F insulation
YR3 series (IP44 IP54) motors are 3-phase asynchronous motors with a wound rotor for general uses. They are the upgraded products of the latest design in China. The grade of power and measurements for installment are in line with I. E. C. International standard. Their mutual relations are similar to those of Model DIN 42679 of West Germany, by changing the rotor's circumscribed resistance, the series motors can acquire good start function and adjusted speed in small scope. They are widely used in start moment which is larger than that for squirrel cage, the capacity of the electrified wire netting that is not enough to start the squirrel cage rotor motor, long and frequent start and in connecting the electric shaft to drive synchronously.
The series motors are sealed motors and the protection grade IP44 IP54 The rated frequency for the motors is 50Hz; While the rated voltage is 380-440v. The insulation is of Grade F and the operation of this motor is S1(continous running). Connection mode: (3KW. Y); Rotor Y. The series motors have a lot of advantages such as high efficiency, strong overloading power, low noise, small shock, reliable framework and beautiful outer casing. Especially the rotor parameter is united in China, so it's convenient for consumers to exchange or form a complete set. Those who once chose the series motors of JRO2, JRO2L and CRO can use YR series (IP44) motors which are more suitable if exported singly or in the form of a complete set.

YR 3551-----4

YR---------------------Wound rotor asynchronous motor

3551----------------------------Center height is 355mm, NO. 1 iron core

4-----------------------------------pole number



Motor Performance
Power range: 4-500KW
Rated Voltage: 380V-440V
Speed; 3000rpm 1500rpm 1000rpm 750rpm 600rpm 500rpm
Protection Class: IP44 IP54
Ambient Temperature: -15° C~40° C
Altitude: Not exceed 1000 Meter
Rated Frequency: 50Hz/60Hz
Insulation Class: F
Temprature rise: B
Working Duty: S1(Continuous)
Connection: Star-connection for up to 3kW; Delta-connection for 4kW and above


Our Servies

WE ARE READY

Q: Do you offer OEM service?
A: Yes.

Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.

Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.

Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.


WHY CHOOSE US

WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting- both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
WHAT PINNXUN CAN DO FOR CUSTOMERS
PINNXUN supplies standard products to customers.
PINNXUN supplies standard products under customers' brands and packaging, etc
PINNXUN R&D department develops any new products together with the customers.

Warranty Terms:
1. Order warranty: We have large production capacity, can ship in a short time.
2. Quality warranty: We test every motor one by one to ensure our quality before we deliver the
Motors.
3. Shipping warranty: We choose the fastest and the most reliable forward agent to deliver our motors.
Delivery terms: Ex-works/FOB, CFR and CIF.
4. Service after sale warranty: Our motors warranty time: 12 months. And We have professional team
Who work on service after sale to help you to solve your technical problem. We will try our best to
Answer all your questions and improve the defect.
5. Replacement warranty: Once you find our motors is defected, we will replace it unconditionally.
Type kW Volts HZ RPM AMPS EF% P.F. Tm Rotor Lp J kgm2 kg Bearings
(Delta) V I (dB) DE NDE
200L1-4 18.5 400 50 1470 33.9 90.3 0.87 3 239.4 47.6 85 0.29 272 6312 6312
200L2-4 22 400 50 1470 40 91 0.87 3 280.9 48 85 0.32 286
225M2-4 30 400 50 1475 52.3 92.2 0.89 3 350 51.5 87 0.63 376 6313 6313
250M1-4 37 400 50 1480 67 92.2 0.86 3 290 78.9 89 0.87 460 6314 6314
250M2-4 45 400 50 1480 80 92.9 0.87 3 338.7 81.7 89 0.98 520
280S-4 55 400 50 1480 97 92.6 0.88 3 466.4 71.5 89 1.86 655 6317 6317
280M-4 75 400 50 1485 131 93.6 0.88 3 381.7 118 90 2.41 765
315S-4 90 400 50 1486 157 93.8 0.88 3 334 159 90 3.97 1175 NU319 6319
315M-4 110 400 50 1486 189 94.8 0.88 3 340 191 90 4.59 1300
315L1-4 132 400 50 1488 226 94.8 0.89 3 419 185 93 5.33 1360
315L2-4 160 400 50 1489 271 94.8 0.9 3 496 189 94 6.11 1450
355M1-4 200 400 50 1489 329 95.2 0.92 3 531 227 94 10.03 1952 NU322 6322
355M2-4 250 400 50 1489 410 95.5 0.92 3 638 236 96 11.33 2078
355L-4 280 400 50 1490 456 95.8 0.92 3 709 237 96 12.47 2194
400L1-4 315 400 50 1485 524 95.1 0.905 2.8 557 340 111 17.85 3390 NU324 6324
400L2-4 355 400 50 1486 587 95.2 0.905 2.8 620 344 111 19.34 3515
400L3-4 400 400 50 1487 659 95.4 0.905 2.8 698 343 111 21.11 3655
200L1-6 15 400 50 980 29.4 89.7 0.82 2.8 199.3 48 78 0.41 276 6312 6312
225M1-6 18.5 400 50 980 35.3 90.4 0.84 2.8 187 62.5 80 0.65 335 6313 6313
225M2-6 22 400 50 980 41.6 91 0.84 2.8 224 61 80 0.72 360
250M1-6 30 400 50 985 55.3 91.4 0.85 2.8 284.7 66.3 80 1.22 480 6314 6314
250M2-6 37 400 50 985 69 91.9 0.84 2.8 337.9 68.5 81 1.35 520
280S-6 45 400 50 985 82 92.5 0.86 2.8 360.9 77.6 82 2.41 645 6317 6317
280M-6 55 400 50 985 98 93.1 0.86 2.8 486 70.1 82 2.74 695
315S-6 75 400 50 990 135 93.5 0.86 2.8 470 98 86 5.48 745 NU319 6319
315M-6 90 400 50 990 161 94.1 0.86 2.8 489 113 86 6.25 1335
315L1-6 110 400 50 990 192 94.6 0.87 2.8 485 140 86 7.3 1421
315L2-6 132 400 50 990 232 94.8 0.86 2.8 477 170 86 8.45 1430
355M1-6 160 400 50 992 281 95 0.86 2.8 471 205 89 12.28 1950 NU322 6322
355M2-6 200 400 50 993 346 95.5 0.87 2.8 577 209 90 14.86 2164
355L-6 220 400 50 993 381 95.5 0.87 2.8 649 204 90 16.71 2273
400L1-6 250 400 50 989 444 94.5 0.86 2.6 446 337 108 20.69 3345 NU324 6324
400L2-6 315 400 50 990 553 94.8 0.86 2.6 536 352 108 23.73 3545
400L3-6 355 400 50 992 627 95.1 0.86 2.8 670 315 108 28.28 3835
200L-8 11 400 50 730 23.7 88.4 0.75 2.4 147.3 47.3 74 0.41 276 6312 6312
225M1-8 15 400 50 735 31.9 89.7 0.75 2.4 169 56 76 0.71 357 6313 6313
225M2-8 18.5 400 50 735 39.1 90.6 0.75 2.4 211 54 76 0.83 387
250M1-8 22 400 50 735 44.5 90.4 0.79 2.4 213.9 64.9 77 1.18 480 6314 6314
250M2-8 30 400 50 735 61.5 91.2 0.77 2.4 274 68.4 78 1.4 520
280S-8 37 400 50 740 74 91.8 0.79 2.4 281 81.7 78 2.36 645 6317 6317
280M-8 45 400 50 740 86 92.8 0.8 2.4 357.7 77.7 80 3 735
315S-8 55 400 50 742 104 93 0.8 2.4 486 69 81 5.24 1050 NU319 6319
315M-8 75 400 50 742 139 93.8 0.81 2.4 498 91 83 6.82 1386
315L1-8 90 400 50 743 172 94.1 0.8 2.4 504 108 83 7.82 1475
315L2-8 110 400 50 743 209 94 0.81 2.4 514 129 83 9.21 1485
355M1-8 132 400 50 743 246 94.4 0.82 2.4 462 171 86 13.24 1908 NU322 6322
355M2-8 160 400 50 744 294 94.5 0.83 2.4 562 170 86 16.05 2086
355L-8 185 400 50 744 345 94.5 0.82 2.4 655 168 86 17.84 2203
400L1-8 200 400 50 740 404 93.8 0.76 3 464 257 102 18.9 3275 NU324 6324
400L2-8 250 400 50 740 498 94 0.76 3 557 267 105 21.94 3470
400L3-8 315 400 50 740 624 94.5 0.76 3



 
 

Product: YR3 winding three phase induction motor


Feature and usage:
YR3 series motor from 4kw-500kw, 2, 4, 6, 8p, IP44, 54 class F insulation
YR3 series (IP44 IP54) motors are 3-phase asynchronous motors with a wound rotor for general uses. They are the upgraded products of the latest design in China. The grade of power and measurements for installment are in line with I. E. C. International standard. Their mutual relations are similar to those of Model DIN 42679 of West Germany, by changing the rotor's circumscribed resistance, the series motors can acquire good start function and adjusted speed in small scope. They are widely used in start moment which is larger than that for squirrel cage, the capacity of the electrified wire netting that is not enough to start the squirrel cage rotor motor, long and frequent start and in connecting the electric shaft to drive synchronously.
The series motors are sealed motors and the protection grade IP44 IP54 The rated frequency for the motors is 50Hz; While the rated voltage is 380-440v. The insulation is of Grade F and the operation of this motor is S1(continous running). Connection mode: (3KW. Y); Rotor Y. The series motors have a lot of advantages such as high efficiency, strong overloading power, low noise, small shock, reliable framework and beautiful outer casing. Especially the rotor parameter is united in China, so it's convenient for consumers to exchange or form a complete set. Those who once chose the series motors of JRO2, JRO2L and CRO can use YR series (IP44) motors which are more suitable if exported singly or in the form of a complete set.

YR 3551-----4

YR---------------------Wound rotor asynchronous motor

3551----------------------------Center height is 355mm, NO. 1 iron core

4-----------------------------------pole number



Motor Performance
Power range: 4-500KW
Rated Voltage: 380V-440V
Speed; 3000rpm 1500rpm 1000rpm 750rpm 600rpm 500rpm
Protection Class: IP44 IP54
Ambient Temperature: -15° C~40° C
Altitude: Not exceed 1000 Meter
Rated Frequency: 50Hz/60Hz
Insulation Class: F
Temprature rise: B
Working Duty: S1(Continuous)
Connection: Star-connection for up to 3kW; Delta-connection for 4kW and above


Our Servies

WE ARE READY

Q: Do you offer OEM service?
A: Yes.

Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.

Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.

Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.


WHY CHOOSE US

WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting- both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
WHAT PINNXUN CAN DO FOR CUSTOMERS
PINNXUN supplies standard products to customers.
PINNXUN supplies standard products under customers' brands and packaging, etc
PINNXUN R&D department develops any new products together with the customers.

Warranty Terms:
1. Order warranty: We have large production capacity, can ship in a short time.
2. Quality warranty: We test every motor one by one to ensure our quality before we deliver the
Motors.
3. Shipping warranty: We choose the fastest and the most reliable forward agent to deliver our motors.
Delivery terms: Ex-works/FOB, CFR and CIF.
4. Service after sale warranty: Our motors warranty time: 12 months. And We have professional team
Who work on service after sale to help you to solve your technical problem. We will try our best to
Answer all your questions and improve the defect.
5. Replacement warranty: Once you find our motors is defected, we will replace it unconditionally.
Type kW Volts HZ RPM AMPS EF% P.F. Tm Rotor Lp J kgm2 kg Bearings
(Delta) V I (dB) DE NDE
200L1-4 18.5 400 50 1470 33.9 90.3 0.87 3 239.4 47.6 85 0.29 272 6312 6312
200L2-4 22 400 50 1470 40 91 0.87 3 280.9 48 85 0.32 286
225M2-4 30 400 50 1475 52.3 92.2 0.89 3 350 51.5 87 0.63 376 6313 6313
250M1-4 37 400 50 1480 67 92.2 0.86 3 290 78.9 89 0.87 460 6314 6314
250M2-4 45 400 50 1480 80 92.9 0.87 3 338.7 81.7 89 0.98 520
280S-4 55 400 50 1480 97 92.6 0.88 3 466.4 71.5 89 1.86 655 6317 6317
280M-4 75 400 50 1485 131 93.6 0.88 3 381.7 118 90 2.41 765
315S-4 90 400 50 1486 157 93.8 0.88 3 334 159 90 3.97 1175 NU319 6319
315M-4 110 400 50 1486 189 94.8 0.88 3 340 191 90 4.59 1300
315L1-4 132 400 50 1488 226 94.8 0.89 3 419 185 93 5.33 1360
315L2-4 160 400 50 1489 271 94.8 0.9 3 496 189 94 6.11 1450
355M1-4 200 400 50 1489 329 95.2 0.92 3 531 227 94 10.03 1952 NU322 6322
355M2-4 250 400 50 1489 410 95.5 0.92 3 638 236 96 11.33 2078
355L-4 280 400 50 1490 456 95.8 0.92 3 709 237 96 12.47 2194
400L1-4 315 400 50 1485 524 95.1 0.905 2.8 557 340 111 17.85 3390 NU324 6324
400L2-4 355 400 50 1486 587 95.2 0.905 2.8 620 344 111 19.34 3515
400L3-4 400 400 50 1487 659 95.4 0.905 2.8 698 343 111 21.11 3655
200L1-6 15 400 50 980 29.4 89.7 0.82 2.8 199.3 48 78 0.41 276 6312 6312
225M1-6 18.5 400 50 980 35.3 90.4 0.84 2.8 187 62.5 80 0.65 335 6313 6313
225M2-6 22 400 50 980 41.6 91 0.84 2.8 224 61 80 0.72 360
250M1-6 30 400 50 985 55.3 91.4 0.85 2.8 284.7 66.3 80 1.22 480 6314 6314
250M2-6 37 400 50 985 69 91.9 0.84 2.8 337.9 68.5 81 1.35 520
280S-6 45 400 50 985 82 92.5 0.86 2.8 360.9 77.6 82 2.41 645 6317 6317
280M-6 55 400 50 985 98 93.1 0.86 2.8 486 70.1 82 2.74 695
315S-6 75 400 50 990 135 93.5 0.86 2.8 470 98 86 5.48 745 NU319 6319
315M-6 90 400 50 990 161 94.1 0.86 2.8 489 113 86 6.25 1335
315L1-6 110 400 50 990 192 94.6 0.87 2.8 485 140 86 7.3 1421
315L2-6 132 400 50 990 232 94.8 0.86 2.8 477 170 86 8.45 1430
355M1-6 160 400 50 992 281 95 0.86 2.8 471 205 89 12.28 1950 NU322 6322
355M2-6 200 400 50 993 346 95.5 0.87 2.8 577 209 90 14.86 2164
355L-6 220 400 50 993 381 95.5 0.87 2.8 649 204 90 16.71 2273
400L1-6 250 400 50 989 444 94.5 0.86 2.6 446 337 108 20.69 3345 NU324 6324
400L2-6 315 400 50 990 553 94.8 0.86 2.6 536 352 108 23.73 3545
400L3-6 355 400 50 992 627 95.1 0.86 2.8 670 315 108 28.28 3835
200L-8 11 400 50 730 23.7 88.4 0.75 2.4 147.3 47.3 74 0.41 276 6312 6312
225M1-8 15 400 50 735 31.9 89.7 0.75 2.4 169 56 76 0.71 357 6313 6313
225M2-8 18.5 400 50 735 39.1 90.6 0.75 2.4 211 54 76 0.83 387
250M1-8 22 400 50 735 44.5 90.4 0.79 2.4 213.9 64.9 77 1.18 480 6314 6314
250M2-8 30 400 50 735 61.5 91.2 0.77 2.4 274 68.4 78 1.4 520
280S-8 37 400 50 740 74 91.8 0.79 2.4 281 81.7 78 2.36 645 6317 6317
280M-8 45 400 50 740 86 92.8 0.8 2.4 357.7 77.7 80 3 735
315S-8 55 400 50 742 104 93 0.8 2.4 486 69 81 5.24 1050 NU319 6319
315M-8 75 400 50 742 139 93.8 0.81 2.4 498 91 83 6.82 1386
315L1-8 90 400 50 743 172 94.1 0.8 2.4 504 108 83 7.82 1475
315L2-8 110 400 50 743 209 94 0.81 2.4 514 129 83 9.21 1485
355M1-8 132 400 50 743 246 94.4 0.82 2.4 462 171 86 13.24 1908 NU322 6322
355M2-8 160 400 50 744 294 94.5 0.83 2.4 562 170 86 16.05 2086
355L-8 185 400 50 744 345 94.5 0.82 2.4 655 168 86 17.84 2203
400L1-8 200 400 50 740 404 93.8 0.76 3 464 257 102 18.9 3275 NU324 6324
400L2-8 250 400 50 740 498 94 0.76 3 557 267 105 21.94 3470
400L3-8 315 400 50 740 624 94.5 0.76 3



 
 

LV Power Cables

Low Voltage Power Cables include PVC Power Cable XLPE Power Cable Orange Circular Cable Nyy Cables N2Xsy R2V Power Cable, they are used for electricity supply in fixed installation, power networks,underground and in cable ducting where where mechanical damages are not to be expected.


Generally, Electric power cables are Copper Wire conductor, PVC insulated, XLPE insulated or LSOH insulated and others, with PVC sheath or LSOH Sheath.


We supply lots of those Cable as per IEC 60502, BS 7889, AS/NZS 5000.1, VDE, SABS and other requirements.






Lv Power Cables,Low Voltage Power Cables,Electric Power Cables,Low Voltage Power Cable

Shenzhen Bendakang Cables Holding Co., Ltd , https://www.bdkcables.com