SF6 gas relay check 1) After overhaul 2) When necessary 1) According to the manufacturer's technical requirements 2) The setting value meets the requirements of the operating regulations and the action is correct. SF6 moisture (dew point) test 1) After overhaul 2) When necessary SF6 gas leak test 1) After overhaul 2) When necessary AC voltage withstand test of capacitive voltage divider of coupling capacitor and capacitive voltage transformer when necessary The test voltage is 75% of the factory test voltage
Plug-in Terminal Block
It is made of two parts of plug-in connection. One part compresses the wire and then plugs it into the other part, which is welded to PCB. The mechanical principle of the connection bottom and the anti vibration design ensure the long-term airtight connection of the product and the use reliability of the finished product. The two ends of the socket can be equipped with lugs, which can protect the lug to a large extent and prevent the poor arrangement of the lug.
At the same time, this kind of socket design can ensure that the socket can be inserted into the matrix correctly. Plug-in Terminal Block ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com cycle Claim cycle Claim
According to the manufacturer's technical requirements cycle Claim
Annual air leakage rate: ≤1% or according to the manufacturer's requirements cycle Claim
The socket can also have assembly and locking positions. The assembly buckle can play a more stable role in fixing to the PCB, and the lock buckle can lock the mother body and the socket after the installation. Various socket designs can be matched with different insertion methods of the parent, such as: horizontal, vertical or inclined to printed circuit board, etc., and different ways can be selected according to the requirements of customers. Either metric wire gauge or standard wire gauge can be selected, which is the most popular terminal type in the market at present.