The LED chip is a PN combination in which a P-layer semiconductor element and an N-layer semiconductor element are rearranged and combined by electron movement. LED chips are the five most important components of the original materials: chips, brackets, silver glue, gold wire, epoxy resin.
Vibration Motor is in the original basis to add a vibrating head, made into a Dc Motor drive with a vibration motor. To produce the shaking force.
6V Dc Vibration Motor is introduced:
6V Dc Vibration Motor volume is generally greater than 15 mm, mainly used in massage chair, massage waist, handheld massager, etc.
Characteristics: small volume, strong vibration;
Operating temperature range:
6V Dc Vibration Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a vibration motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Dc Vibration Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
6V Dc Vibration Motor,Dc Vibration Motor,6V Dc Micro Vibration Motor,Small Size 6V Dc Vibration Motor Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
Mainly composed of gold pad, P pole, N pole, PN junction, back gold layer (double pad chip without back gold layer).
Let us first understand the principle of LED chip illumination: when the chip is applied with a positive voltage by a certain voltage, the hole in the positive P region will continuously swim to the N region, and the electrons in the N region will be opposite to the hole. P area movement. In the electrons, while the holes move relative to each other, the electron holes are paired with each other to excite photons and generate light energy. When a current flows from the anode to the cathode, the crystal emits light of different colors from ultraviolet to infrared, and the intensity of the light is related to the current.
We will continue to understand the classification of LED chips. LED chips can be classified into N/P and P/N according to their polarity. According to the illuminating part, it is divided into surface illuminating type (most of the light is emitted from the surface of the chip) and five-sided illuminating type (the surface and the side have more light emission). If divided according to the composition can be divided into: binary, ternary, quaternary LED chips. The so-called binary, ternary, and quaternary LED chips refer to the number of effective elements contained in the chip. If you divide by component, you can divide it into the following types:
A. Binary chip (phosphorus, gallium): H, G, etc. (there are two effective elements)
B. Ternary chip (phosphorus, gallium, arsenic): SR, HR, UR, etc. (there are three effective elements)
C. Quaternary chips (phosphorus, aluminum, gallium, indium): SRF, HRF, URF, VY, HY, UY, UYS, UE, HE, UG, etc.
Take the ternary LED chip as an example. It refers to LED chips mainly containing three elements, such as HY, HO, IR, SR, etc., which is called ternary LED. The visible light brightness is generally lower than that of the quaternary (four elements) LED. The red light chip used in the full color display screen is mostly a quaternary product, which is characterized by high brightness.
The distinction between ternary LED chips and quaternary LED chips is mainly due to the different semiconductor materials in their illuminating regions. Such as ternary LED chips have GaALAs GaAsP and so on. The quaternary chip refers to InGaALP. Although the materials of ternary and quaternary are different, the brightness of quaternary elements is higher, but the quaternary LED has more IR than the ternary. It is more difficult to work with anti-static.
Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
Method of use: the best stable in horizontal plane, installed on the dc 6V Dc Vibration Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc 6V Dc Vibration Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
