#################################################################################of

Hello everyone, I am a mysterious person: xxp_41

There will always be a couple of cameras on the boy's paper. Life is like a philatelic album. Like CGX, it will always take photos for them. It is an old camera. The Sony α series NEX-5C, commonly known as: "From the time it was released to the next shelf and now it has gone through 7 years, the memories of the first generation of Dafa's first micro-singles left for many people have now reached the Sony α9."

Sony's alpha

1. The name of Sony's alpha series actually followed the name of Konica Minolta's SLR camera series. Before the merger of Minolta and Konica, Minolta himself used alpha to name his film SLR. Later, the two merged and released several digital SLRs. After the acquisition of Konica Minolta, Sony ceased its just-initiated non-changeable lens APS-C R1. In January 2007, it launched the A100, which is regarded as opening its own digital single-channel;

2, Sony put all the interchangeable lens products under alpha - including digital SLR, digital single electricity.

At the time, it was only 4,500 yuan to buy offline, which is quite cheap. Do you want to fake it out of the box? Okay, I'll just fake it out of the box.

NEX-5C is a metal body, 1420w pixels, external flash, the highest specification of the video is 1080i interlacing

Regarding the difference between 1080p and 1080i, the simple point is that 1080i displays 30 full frames per second, while 1080p displays 60 full frames, so 1080p is more stable and smooth than 1080i. 1080i means “able” to display 1920*1280 The program, but it does not have a physical resolution of 1920 * 1280, but only after the 1920 * 1280 image processing is displayed.

Although these hardware parameters now appear to be "mediostat outdated," they were also the flagship models of the first generation. The first time, there are always a lot of criticisms, such as: the dial navigation key is easy to be bad, the flash hot shoe is special, the handle skin is easy to fall off, the handle grip is poor, the design of the tripod screw part, etc., but Many of these ill-conceived anti-micro bills have also made many SLR veterans generously start their careers as backup machines. The main reason for starting a standby machine is that its image quality can almost reach the effect of a SLR, and it can record photos in a lossless format.

Accessories: flash, battery charger, battery, data cable, shoulder strap, several manuals, and driver software CD.

I remember that when the NEX-5C was just released, the number of E-card lenses was very small! ! ! At the time of publication, only Sony and Zeiss supported each other. At that time, the Zeiss lens of the E-card could not be found, but the limitations of the NEX-5C playability at that time could not be considered, but later 1-2 years, the third party. The accessories appear like spring bamboo shoots after raining, various transfer lenses, various rings, just like open hanging:

Because there is no anti-construction, so it is easier to transfer all kinds of lenses, the basic adapter ring is more manual focus, and later out of the auto focus can be exchanged, the deputy head has gradually increased.

The overall structure of the NEX-5C line at the time highlighted the lens. The kit was purchased as a 18-55 “dog head” kit. At the time, there was a champagne version with a dual lens version: dog head + cookie head, personal Still like the traditional camera black, so did not buy champagne gold.

18-55 standard dog head dog head can also be a good film, to see how to shoot, and at the end of the paper there are a few proofs out of the dog's head sample. Actually, I don’t know how to take pictures.

The shorter the flange length of the micro-single is, the better the edge quality will be. This is also because the micro-single makes it more playable than the single reversal lens.

Flange distance is the distance between the mounting flange and the point of convergence of the collimated light from the incident lens. The popular point is the distance from the body lens mount to the sensor.

NEX-5C's SONY logo is concave white paint, α mark is horizontal stripes, the lower right corner is marked with 14.2W pixels.

The NEX-5C's handle is one of the culprits. If it is a man's palm, only the thumb, index finger, middle finger, and ring finger can be used. The little finger is suspended or holds the bottom of the camera. This kind of grab can have no obvious sense of fatigue for a short time. If you grab it for a long time, it is easy to bend and fatigue your fingers. This disease has also spawned Omnipotent Taobao's production of manual handles:

When this kind of hand-made wooden handle had just emerged, almost all the old birds were looking for wood craftsmen to create. There were four or five hundred dollars at a time, and the wood used was also varied. This hand-made wooden handle can indeed improve the grasping problem after it is mounted on the machine, and it also appears to be more artistic.

Above the handle there is an infrared receiver and camera auxiliary light. The auxiliary light is used for focusing light in low light conditions. The auxiliary light can be turned off in settings.

The NEX-5C's handle is also a battery compartment that supports dual-format memory cards: Sony's own memory stick and universal popular SD card, but can't use two cards at the same time. A few years ago, the price of the memory stick was very, very expensive, and read. Write speed is also not as fast as SD card. NEX-5C supports a maximum of seven continuous shots per second. This is also an excellent memory card writing speed. At that time, the limitations of the conditions were hard to achieve 7 per second, and at most 5, 6 or so, Sony's own energy. High-speed cards that reach full speed are very expensive to sell and require ordering to buy them. The NP-FW50 battery used by the NEX-5C has a capacity of 1080mAh, and the maximum number of photographs can be more than 300. There is no electricity, because the NEX-5C itself does not have an optical viewfinder frame or an electronic viewfinder frame, and the electronic LCD is used for framing. So the power consumption is very large.

NEX-5C top control part, the lever-type power switch on the top right, the shutter button on the slope of the top of the handle, this is the design of the earlier Sony micro-single, in the follow-up models almost changed into a 3-in-one Buttons: power switch, shutter button, zoom lever, but also because the follow-up models with a new "dog head": the reason for the power zoom head, making the whole with a streamlined and harmonious beauty. There is a red dot-independent video capture button at the bottom right of the power switch, which allows you to quickly enter video capture.

NEX-5C supports two-channel stereo recording, so you can see two symmetrically distributed microphone holes at the top of the fuselage.

The NEX-5C does not have a built-in flash. It uses a dedicated hot shoe with an independent flash. The flash is turned on and the press is off.

The flash unit and the camera body have no hidden latches, so tighten the flash flash nut after installation.

The left side of the fuselage is the USB interface and HDMI interface for data transmission.

NEX-5C is equipped with a LCD screen can be flipped up and down, this LCD screen is 920,000 pixels, 3 inch size, you can flip 80 degrees, the next 45 degrees tilt. At that time, many people would think that the flip screen is not practical and the LCD screen is exposed and easily damaged. In real life, sometimes it is necessary to use a flip screen when viewing at low angles. Now the flip screen has become almost a single SLR micro-single. Standard configuration.

NEX-5 only 3 buttons on the back of the fuselage and a turntable design, if the operation is convenient from the point of view, it is really very uncomfortable, adjust a parameter to open a few menu to select! It may also be that I am accustomed to the convenient operation of the SLR multi-button, but now look at the latest release of the Sony α9 added a lot of SLR button elements, it will be a lot easier.

NEX-5 body is no body anti-shake technology, only using lens stabilization technology, follow-up models Sony α7 II at the same time achieve black technology: body image stabilization + lens stabilization. The body is not anti-shake, when using the conversion ring to switch the lens, we must practice the "iron hand" skills, or a tripod + shutter release.

I like the black-and-white photo shoot, just like my brother: simple black and white road.

The 20-word summary: There are too many deficiencies in the first generation of micro-single, and after seven years of experience, it is full of blood and black technology.

I want Sony α9

Xiao Bian Note: In order to thank you for the first enthusiasm of the value of friends, in response to the voice of everyone, the activity split out of the lower threshold of the sub-activity # # of the first sun! Welcome everyone to share good things that haven't been sunk in this site and provide more shopping references for valued friends!

Remote Switch

REMOTE CONTROL SOCKET
Important Safeguards
When using any electrical appliance, in order to reduce the risk of fire, electric shock and/or injury to persons, basic safety precautions should always be follow8d. including:
• The appliance is for household and indoor use only.
• Before plugging in. check that the voitage on the rating label is the same as the mains supply.
• To protect against electric shock, do not immerse any part of the product in water or other liquid.
• This socket is intended for use by competent adults only and children should be supervised at all times.
• Do not use the socket for other than its intended use.
• This socket can be used by children aged from 8 years arxl above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not p<ay with the appliance Cleaning and user maintenance shall M be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
Children from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in. regulate and clean the appliance or perform user maintenance.
• Don't use this socket in the immediate surroundings of a bath, a shower or a swimming pool.
• In case of malfunction, do not try to repair the socket yourself, it may result in a fire hazard or electric shock
Do Not Exceed Maximum a680W
Place the LR44 batteries provided into the compartment in the back of the Remote Control, please insert as sho*/m in the back of the compartment to ensure the polarity is correct.

Programming Instructions
• Plug the Remoce Socket$($)lnto the wall socket(s) and switch on the mams supply, the red LED will flash every second.
• If the LED is not flashing press & hold the manual ON/OFF button for 5 seconds until it Hashes

•Press any ON switch on the Remote Control for approximately 2 seconds and the Remote Socket(s) learn the code. The LED will stop flashing top confirm the codehas been accepted.
• Any number of Remote Sockets can be programmed to one Remote Control ON button to create multiple switching.
• To programme o<her Remote Sockets on different Remote Control ON buttons repeat the prevous steps
• If the mains supply is turned off the Remote Sockets v/ill lose their code and it wil be necessary to re-pcogramme.
Operation:
• Plug your appliance(s) into the Remote Socket(s)
• Press the programmed ON or OFF button on the Remote Control to control the Remote Socket.
♦ The Remote Sockets can also be operated manually using its ON/OFF Button Trouble shooting
If a Remote Socket does not react to the Remote Control please check the followng:
♦ Low battery in tbo Remote Control
• Distance too large between the remote control and the recerver (ensure the range distance is no more than 20 clear Metres) and free from obstacle that may reduce the distance.
• If programming has not been successful, tum the power off and back on then follow the programming steps above.
How to decode
• Press the manual ONX)FF button for 5 seconds until the red LED flashes once per
second to confirm de-coding is successful
♦ Press the ALL OFF switch on the Remote Control for more than 3 seconds, the LED
flashes once per second to confirm (decoding successful.
Voltage: 240V-/50HZ
Max power rating: 3680W max.
Remote frequency:
Remote range:
Battery Type:
433.92MHz
230 Metres
Button Cell 2x1.5V LR44 =
Please check with your local waste management service authority regarding regulations for the safe disposal of the batteries. The batteries should never be placed G municipal waste.
Use a battery d^posal facility if available
M
For eioctncal products sold within the European Community. At the end of the electrical products useful life, it should not be disposed of wth household waste. Please recycle faaMies exist. Check with your Local Authonty or retailer for recycling advice.
C€

remote switch,remote plug,remote control switch,remote power switch,remote control sockets

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com