Refrigerator is one of the essential home appliances in our daily life. I believe many of my friends are very familiar with it, but this does not mean that users have no doubt when using the refrigerator. As far as the handling of the refrigerator is concerned, it seems very simple, and the actual handling process involves many small details worth noting. Tape fixing accessories or take out Before handling: Unplug the power supply, cut off the power supply, take out all the food in the refrigerator, and fix the movable parts such as the refrigerator compartment shelf, the humidor and the freezer drawer with tape. Close the refrigerator door and fix it with tape to avoid being opened when moving. The tilt of the fuselage cannot exceed 45 degrees During the handling: When transporting the refrigerator, please pay attention to the tilt of the fuselage can not exceed 45 degrees, to maintain the vertical state of the box, do not invert and horizontally, can not grab the door handle or drag the condenser to avoid damage . Because there is a compressor on the bottom in the back wall of the refrigerator, there is some lubricant in the bottom of the compressor and in the casing of the motor. If the refrigerator is tilted or over-tilted during handling, it will cause the lubricating oil to flow into the refrigeration system above the compressor and the motor. This will hinder the circulation of Freon in the refrigeration system and affect the normal operation of the refrigeration system. . Another point, if the refrigerator is placed upside down, it will cause the decoupling of the shock absorbing spring in the compressor, and the refrigerator will not operate normally. Prevent bumps and severe vibration during transportation During transportation, try to prevent bumps or severe vibrations to prevent damage to the welded parts of the compressor and piping, causing refrigerant leakage. Stand still after transportation After transportation: It can be energized for at least 2-4 hours to protect the life of the compressor. Since the compressor is shaken after the compressor is moved, the impurities in the refrigerant must be precipitated before it can be operated. Otherwise, when the compressor sends out the refrigerant liquid, it will block the high and low pressure valves, resulting in a decrease in the cooling effect. After powering for half an hour, put things in the refrigerator, which is good for maintenance! Placed away from heat sources and low humidity The refrigerator should be placed away from the heat source and away from direct sunlight. It needs to exchange heat with the outside world during work and dissipate heat to the outside through the condenser. The higher the ambient temperature, the slower the heat dissipation, which will make the refrigerator work longer and increase. Power consumption, poor cooling performance. It should also be placed in a place with low humidity and ventilation. Since the refrigerator casing, condenser and compressor are all metal materials, if the humidity of the air is too high, these components will rust and shorten the service life of the refrigerator. At the same time, the humid and overheated environment will cause condensation on the surface of the refrigerator and affect the performance of the electrical appliance. Due to the large size and heavy weight of the refrigerator, many friends have a headache when carrying it. If it is damaged during handling, it will also affect the normal operation of the refrigerator in the future. Therefore, these details cannot be forgotten during the handling of the refrigerator! Insulated Copper Tube Terminals Insulated Copper Tube Terminals,High quality insulated terminal,copper tube terminal Taixing Longyi Terminals Co.,Ltd. , https://www.longyicopperlugs.com